Blog Layout

Nationwide Retailer

Connor Felstead • Apr 12, 2023

Saving energy in retail

Background

With over 600 sites UK wide, this retailer has taken a nation-wide approach to net 0 carbon by 2040. With the vast number of sites, rewiring every site is not an option, so utilising a wireless solution to assist achieving this is the best, and cheapest option.

Challenge

Most stores consist of long trunking lights daisy-chaining together to form a long continuous light over an aisle. During shopping hours, a continuous, unchanging, light level is required store-wise but during non-operational hours and during stocking hours, adjustable, presence/absence levels can be utilised. The exact lux levels for both are unknown to achieve the best balance between required lighting and energy saving methods.

Solution

Using the flexibility of the Mesh, the trunking chains have been connected to a uBLC via a dali-bus to ensure all lights have the ability to dim if needed. Remote PIRs powered by batteries, where appropriate, and daylight harvesting sensors are throughout the site, all connected with one another and connected to a gateway and a 4DI. The 4DI is linked so that during working hours, all fittings are set to an appropriate light level for that particular site- and when out of these hours, can be put into night time/stocking mode. This mode allows devices to be dimmed, off, or staggered to allow light when needed, but not maximum lux so sufficient light can be used for stocking while being energy conscious. These levels can be adjusted remotely by the ethernet gateway to achieve high-end trimming.

Benefits

As the retail market cannot close, installation of the wireless solution, and the ability to change settings remotely, means that install happens over one evening outside of working hours so does not impact trading at all.


The introduction of working hours/stocking hours in the lights means a drastic saving of energy with running devices at less than 100%, while keeping some off that are not needed.


Utilisation of the dali-bus means install happens quickly via contractors and the ease of commissioning, and the productivity of the installation teams, keeps the install and commissioning stages simple and efficient.


The client reports that the current overall savings for the stores is around £4.2 million annually. And this is with about half of the stores converted. A very quick pay-back.

SHARE

by Jasper Hijink 20 Oct, 2023
New City Fitness is expanding to Epping Forest
by Jasper Hijink 07 Aug, 2023
Eton College Sports and Aquatic Centre
by Jasper Hijink 25 Apr, 2023
Northumbria University - City Campus East 1 & 2
by Jasper Hijink 21 Apr, 2023
Message from Eric van Schagen, CEO Simac
by Connor Felstead 19 Apr, 2023
Bluewater Roof tops
by Jasper Hijink 18 Apr, 2023
'Working' light control with employee tag
by Connor Felstead 07 Apr, 2023
Bluewater front of house: RGBW
by Connor Felstead 05 Apr, 2023
Lewisham Hospital Maternity Ward, Wash rooms and adjoining areas
by Jasper Hijink 02 Apr, 2023
10 Brindleyplace (Birmingham) nears completion
MORE POSTS
Share by: