Chess connectivity

Modbus Setpoint Control

Article number: BLC.1110.001

The Modbus Setpoint Control controls lighting via the Mymesh network. Through the network, it is capable of controlling intensity, tuneable white and full colour. The Modbus server device has eight registers where any Modbus client can read from or write to. Through the registers, the client can control certain setpoints (intensity/tuneable white/RGBW) of the eight groups.

Installation

  • The Modbus Setpoint Control is connected to a Modbus PLC -or similar device. The eight registers are commissioned via the Mymesh App. Here you connect them to a room or zone.
  • For Modbus server programmers who want to implement light control via the Modbus interface, a seperate interface design document (IDD) is available. Please contact your local Mymesh dealer for more information.

    • Technical

    Electrical
    220-240Vac 50/60Hz
    Control
    RS-485 Modbus
    Dimensions/weight
    90.75 X 39.5 X 29.64 mm / 106g
    IP rating
    IP20

    Network

  • Mymesh 2.4GHz
  • Modbus

    • Features

  • A Mymesh Modbus server operates in the 2.4GHz ISM band.
  • Connects Mymesh to Modbus via a Modbus API.
  • The Modbus Server has a build-in antenna that provides enough reach for most indoor office and
    industrial applications.

    • Notes

  • On-the-fly (re) commissioning with a Mymesh BLE Gateway and Mymesh commissioning app for iPad
  • Connect to third-party back-office / Light Management system (LMS) via a Mymesh Ethernet Gateway
    • Share by: